collectorManager: Make markers opt-in

These markers are sent out at the beginning and end of a collection run.
This can be used to reconstruct, which metrics belong together and were
obtained during the same tick.

cc-metric-collector.go

@@ -29,15 +29,17 @@ import (
 )
 
 type CentralConfigFile struct {
-	Interval string `json:"interval"`
-	Duration string `json:"duration"`
+	Interval      string `json:"interval"`
+	Duration      string `json:"duration"`
+	EnableMarkers bool   `json:"enable-markers"`
 }
 
 type RuntimeConfig struct {
-	Interval   time.Duration
-	Duration   time.Duration
-	CliArgs    map[string]string
-	ConfigFile CentralConfigFile
+	Interval      time.Duration
+	Duration      time.Duration
+	EnableMarkers bool
+	CliArgs       map[string]string
+	ConfigFile    CentralConfigFile
 
 	MetricRouter    mr.MetricRouter
 	CollectManager  collectors.CollectorManager
@@ -157,6 +159,7 @@ func mainFunc() int {
 		cclog.Error("The interval should be greater than duration")
 		return 1
 	}
+	rcfg.EnableMarkers = rcfg.ConfigFile.EnableMarkers
 
 	routerConf := ccconf.GetPackageConfig("router")
 	if len(routerConf) == 0 {
@@ -199,7 +202,7 @@ func mainFunc() int {
 	rcfg.MetricRouter.AddOutput(RouterToSinksChannel)
 
 	// Create new collector manager
-	rcfg.CollectManager, err = collectors.New(rcfg.MultiChanTicker, rcfg.Duration, &rcfg.Sync, collectorConf)
+	rcfg.CollectManager, err = collectors.New(rcfg.MultiChanTicker, rcfg.Duration, rcfg.EnableMarkers, &rcfg.Sync, collectorConf)
 	if err != nil {
 		cclog.Error(err.Error())
 		return 1

collectors/collectorManager.go

@@ -21,54 +21,57 @@ import (
 
 // Map of all available metric collectors
 var AvailableCollectors = map[string]MetricCollector{
-	"likwid":          new(LikwidCollector),
-	"loadavg":         new(LoadavgCollector),
-	"memstat":         new(MemstatCollector),
-	"netstat":         new(NetstatCollector),
-	"ibstat":          new(InfinibandCollector),
-	"lustrestat":      new(LustreCollector),
-	"cpustat":         new(CpustatCollector),
-	"topprocs":        new(TopProcsCollector),
-	"nvidia":          new(NvidiaCollector),
-	"customcmd":       new(CustomCmdCollector),
-	"iostat":          new(IOstatCollector),
-	"diskstat":        new(DiskstatCollector),
-	"tempstat":        new(TempCollector),
-	"ipmistat":        new(IpmiCollector),
-	"gpfs":            new(GpfsCollector),
-	"cpufreq":         new(CPUFreqCollector),
-	"cpufreq_cpuinfo": new(CPUFreqCpuInfoCollector),
-	"nfs3stat":        new(Nfs3Collector),
-	"nfs4stat":        new(Nfs4Collector),
-	"numastats":       new(NUMAStatsCollector),
-	"beegfs_meta":     new(BeegfsMetaCollector),
-	"beegfs_storage":  new(BeegfsStorageCollector),
-	"rapl":            new(RAPLCollector),
-	"rocm_smi":        new(RocmSmiCollector),
-	"self":            new(SelfCollector),
-	"schedstat":       new(SchedstatCollector),
-	"nfsiostat":       new(NfsIOStatCollector),
-	"slurm_cgroup":    new(SlurmCgroupCollector),
-	"smartmon":        new(SmartMonCollector),
+	"likwid":             new(LikwidCollector),
+	"loadavg":            new(LoadavgCollector),
+	"memstat":            new(MemstatCollector),
+	"netstat":            new(NetstatCollector),
+	"ibstat":             new(InfinibandCollector),
+	"lustrestat":         new(LustreCollector),
+	"cpustat":            new(CpustatCollector),
+	"topprocs":           new(TopProcsCollector),
+	"nvidia":             new(NvidiaCollector),
+	"customcmd":          new(CustomCmdCollector),
+	"iostat":             new(IOstatCollector),
+	"diskstat":           new(DiskstatCollector),
+	"tempstat":           new(TempCollector),
+	"ipmistat":           new(IpmiCollector),
+	"gpfs":               new(GpfsCollector),
+	"cpufreq":            new(CPUFreqCollector),
+	"cpufreq_cpuinfo":    new(CPUFreqCpuInfoCollector),
+	"nfs3stat":           new(Nfs3Collector),
+	"nfs4stat":           new(Nfs4Collector),
+	"numastats":          new(NUMAStatsCollector),
+	"beegfs_meta":        new(BeegfsMetaCollector),
+	"beegfs_storage":     new(BeegfsStorageCollector),
+	"rapl":               new(RAPLCollector),
+	"rocm_smi":           new(RocmSmiCollector),
+	"self":               new(SelfCollector),
+	"schedstat":          new(SchedstatCollector),
+	"nfsiostat":          new(NfsIOStatCollector),
+	"slurm_cgroup":       new(SlurmCgroupCollector),
+	"smartmon":           new(SmartMonCollector),
+	"lenovo_dense_power": new(LenovoDensePowerCollector),
+	"megware_eureka":     new(MegwareEurekaCollector),
 }
 
 // Metric collector manager data structure
 type collectorManager struct {
-	collectors   []MetricCollector          // List of metric collectors to read in parallel
-	serial       []MetricCollector          // List of metric collectors to read serially
-	output       chan lp.CCMessage          // Output channels
-	done         chan bool                  // channel to finish / stop metric collector manager
-	ticker       mct.MultiChanTicker        // periodically ticking once each interval
-	duration     time.Duration              // duration (for metrics that measure over a given duration)
-	wg           *sync.WaitGroup            // wait group for all goroutines in cc-metric-collector
-	config       map[string]json.RawMessage // json encoded config for collector manager
-	collector_wg sync.WaitGroup             // internally used wait group for the parallel reading of collector
-	parallel_run bool                       // Flag whether the collectors are currently read in parallel
+	collectors    []MetricCollector          // List of metric collectors to read in parallel
+	serial        []MetricCollector          // List of metric collectors to read serially
+	output        chan lp.CCMessage          // Output channels
+	done          chan bool                  // channel to finish / stop metric collector manager
+	ticker        mct.MultiChanTicker        // periodically ticking once each interval
+	duration      time.Duration              // duration (for metrics that measure over a given duration)
+	wg            *sync.WaitGroup            // wait group for all goroutines in cc-metric-collector
+	config        map[string]json.RawMessage // json encoded config for collector manager
+	collector_wg  sync.WaitGroup             // internally used wait group for the parallel reading of collector
+	parallel_run  bool                       // Flag whether the collectors are currently read in parallel
+	enableMarkers bool                       // Send ccmc-{begin,end} metrics
 }
 
 // Metric collector manager access functions
 type CollectorManager interface {
-	Init(ticker mct.MultiChanTicker, duration time.Duration, wg *sync.WaitGroup, collectConfig json.RawMessage) error
+	Init(ticker mct.MultiChanTicker, duration time.Duration, enableMarkers bool, wg *sync.WaitGroup, collectConfig json.RawMessage) error
 	AddOutput(output chan lp.CCMessage)
 	Start()
 	Close()
@@ -81,7 +84,7 @@ type CollectorManager interface {
 // * ticker (from variable ticker)
 // * configuration (read from config file in variable collectConfigFile)
 // Initialization is done for all configured collectors
-func (cm *collectorManager) Init(ticker mct.MultiChanTicker, duration time.Duration, wg *sync.WaitGroup, collectConfig json.RawMessage) error {
+func (cm *collectorManager) Init(ticker mct.MultiChanTicker, duration time.Duration, enableMarkers bool, wg *sync.WaitGroup, collectConfig json.RawMessage) error {
 	cm.collectors = make([]MetricCollector, 0)
 	cm.serial = make([]MetricCollector, 0)
 	cm.output = nil
@@ -89,6 +92,7 @@ func (cm *collectorManager) Init(ticker mct.MultiChanTicker, duration time.Durat
 	cm.wg = wg
 	cm.ticker = ticker
 	cm.duration = duration
+	cm.enableMarkers = enableMarkers
 
 	d := json.NewDecoder(bytes.NewReader(collectConfig))
 	d.DisallowUnknownFields()
@@ -146,6 +150,9 @@ func (cm *collectorManager) Start() {
 				done()
 				return
 			case t := <-tick:
+				if cm.enableMarkers {
+					lp.NewMetric("ccmc-begin", map[string]string{"type": "node"}, nil, map[string]interface{}{"value": 0}, time.Now())
+				}
 				cm.parallel_run = true
 				for _, c := range cm.collectors {
 					// Wait for done signal or execute the collector
@@ -177,6 +184,9 @@ func (cm *collectorManager) Start() {
 						c.Read(cm.duration, cm.output)
 					}
 				}
+				if cm.enableMarkers {
+					lp.NewMetric("ccmc-end", map[string]string{"type": "node"}, nil, map[string]interface{}{"value": 0}, time.Now())
+				}
 			}
 		}
 	})
@@ -199,9 +209,9 @@ func (cm *collectorManager) Close() {
 }
 
 // New creates a new initialized metric collector manager
-func New(ticker mct.MultiChanTicker, duration time.Duration, wg *sync.WaitGroup, collectConfig json.RawMessage) (CollectorManager, error) {
+func New(ticker mct.MultiChanTicker, duration time.Duration, enableMarkers bool, wg *sync.WaitGroup, collectConfig json.RawMessage) (CollectorManager, error) {
 	cm := new(collectorManager)
-	err := cm.Init(ticker, duration, wg, collectConfig)
+	err := cm.Init(ticker, duration, enableMarkers, wg, collectConfig)
 	if err != nil {
 		return nil, err
 	}

collectors/cpufreqCpuinfoMetric.go

@@ -116,6 +116,9 @@ func (m *CPUFreqCpuInfoCollector) Init(_ json.RawMessage) error {
 			physicalPackageID = ""
 		}
 	}
+	if err := scanner.Err(); err != nil {
+		return fmt.Errorf("%s Init(): Call to scanner.Err failed: %w", m.name, err)
+	}
 
 	if err := file.Close(); err != nil {
 		return fmt.Errorf("%s Init(): Call to file.Close() failed: %w", m.name, err)
@@ -179,6 +182,9 @@ func (m *CPUFreqCpuInfoCollector) Read(interval time.Duration, output chan lp.CC
 			}
 		}
 	}
+	if err := scanner.Err(); err != nil {
+		cclog.ComponentErrorf(m.name, "Read(): Call to scanner.Err failed: %s", err.Error())
+	}
 }
 
 func (m *CPUFreqCpuInfoCollector) Close() {

collectors/cpustatMetric.go

@@ -44,7 +44,7 @@ type CpustatCollector struct {
 func (m *CpustatCollector) Init(config json.RawMessage) error {
 	m.name = "CpustatCollector"
 	if err := m.setup(); err != nil {
-		return fmt.Errorf("%s Init(): setup() call failed: %w", m.name, err)
+		return fmt.Errorf("%s Init(): setup() call failed: %s", m.name, err.Error())
 	}
 	m.parallel = true
 	m.meta = map[string]string{
@@ -58,7 +58,7 @@ func (m *CpustatCollector) Init(config json.RawMessage) error {
 		d := json.NewDecoder(bytes.NewReader(config))
 		d.DisallowUnknownFields()
 		if err := d.Decode(&m.config); err != nil {
-			return fmt.Errorf("%s Init(): Error decoding JSON config: %w", m.name, err)
+			return fmt.Errorf("%s Init(): Error decoding JSON config: %s", m.name, err.Error())
 		}
 	}
 	matches := map[string]int{
@@ -85,7 +85,7 @@ func (m *CpustatCollector) Init(config json.RawMessage) error {
 	// Check input file
 	file, err := os.Open(CPUSTATFILE)
 	if err != nil {
-		return fmt.Errorf("%s Init(): Failed to open file '%s': %w", m.name, CPUSTATFILE, err)
+		return fmt.Errorf("%s Init(): Failed to open file '%s': %s", m.name, CPUSTATFILE, err.Error())
 	}
 
 	// Pre-generate tags for all CPUs
@@ -117,10 +117,13 @@ func (m *CpustatCollector) Init(config json.RawMessage) error {
 			num_cpus++
 		}
 	}
+	if err := scanner.Err(); err != nil {
+		return fmt.Errorf("%s Init(): Call to scanner.Err failed: %s", m.name, err.Error())
+	}
 
 	// Close file
 	if err := file.Close(); err != nil {
-		return fmt.Errorf("%s Init(): Failed to close file '%s': %w", m.name, CPUSTATFILE, err)
+		return fmt.Errorf("%s Init(): Failed to close file '%s': %s", m.name, CPUSTATFILE, err.Error())
 	}
 
 	m.lastTimestamp = time.Now()
@@ -173,13 +176,13 @@ func (m *CpustatCollector) Read(interval time.Duration, output chan lp.CCMessage
 	if err != nil {
 		cclog.ComponentError(
 			m.name,
-			fmt.Sprintf("Read(): Failed to open file '%s': %v", CPUSTATFILE, err))
+			fmt.Sprintf("Read(): Failed to open file '%s': %v", CPUSTATFILE, err.Error()))
 	}
 	defer func() {
 		if err := file.Close(); err != nil {
 			cclog.ComponentError(
 				m.name,
-				fmt.Sprintf("Read(): Failed to close file '%s': %v", string(CPUSTATFILE), err))
+				fmt.Sprintf("Read(): Failed to close file '%s': %v", string(CPUSTATFILE), err.Error()))
 		}
 	}()
 
@@ -194,6 +197,9 @@ func (m *CpustatCollector) Read(interval time.Duration, output chan lp.CCMessage
 			num_cpus++
 		}
 	}
+	if err := scanner.Err(); err != nil {
+		cclog.ComponentErrorf(m.name, "Init(): Call to scanner.Err failed: %s", err.Error())
+	}
 
 	if !m.config.excludeNumCPUs {
 		if num_cpus_metric, err := lp.NewMetric("num_cpus", m.nodetags, m.meta, num_cpus, now); err == nil {

collectors/diskstatMetric.go

@@ -147,6 +147,11 @@ mountLoop:
 			}
 		}
 	}
+	if err := scanner.Err(); err != nil {
+		cclog.ComponentErrorf(
+			m.name,
+			"Read(): Call to scanner.Err failed: %s", err.Error())
+	}
 	if m.allowedMetrics["part_max_used"] {
 		y, err := lp.NewMetric("part_max_used", map[string]string{"type": "node"}, m.meta, int(part_max_used), time.Now())
 		if err == nil {

collectors/iostatMetric.go

@@ -48,13 +48,13 @@ func (m *IOstatCollector) Init(config json.RawMessage) error {
 	m.parallel = true
 	m.meta = map[string]string{"source": m.name, "group": "Disk"}
 	if err := m.setup(); err != nil {
-		return fmt.Errorf("%s Init(): setup() call failed: %w", m.name, err)
+		return fmt.Errorf("%s Init(): setup() call failed: %s", m.name, err.Error())
 	}
 	if len(config) > 0 {
 		d := json.NewDecoder(bytes.NewReader(config))
 		d.DisallowUnknownFields()
 		if err := d.Decode(&m.config); err != nil {
-			return fmt.Errorf("%s Init(): Error decoding JSON config: %w", m.name, err)
+			return fmt.Errorf("%s Init(): Error decoding JSON config: %s", m.name, err.Error())
 		}
 	}
 	// https://www.kernel.org/doc/html/latest/admin-guide/iostats.html
@@ -89,7 +89,7 @@ func (m *IOstatCollector) Init(config json.RawMessage) error {
 	}
 	file, err := os.Open(IOSTATFILE)
 	if err != nil {
-		return fmt.Errorf("%s Init(): Failed to open file \"%s\": %w", m.name, IOSTATFILE, err)
+		return fmt.Errorf("%s Init(): Failed to open file \"%s\": %s", m.name, IOSTATFILE, err.Error())
 	}
 
 	scanner := bufio.NewScanner(file)
@@ -130,8 +130,11 @@ func (m *IOstatCollector) Init(config json.RawMessage) error {
 			lastValues:    lastValues,
 		}
 	}
+	if err := scanner.Err(); err != nil {
+		return fmt.Errorf("%s Init(): Failed to scan content of file %q: %s", m.name, IOSTATFILE, err.Error())
+	}
 	if err := file.Close(); err != nil {
-		return fmt.Errorf("%s Init(): Failed to close file \"%s\": %w", m.name, IOSTATFILE, err)
+		return fmt.Errorf("%s Init(): Failed to close file \"%s\": %s", m.name, IOSTATFILE, err.Error())
 	}
 
 	m.init = true
@@ -147,14 +150,14 @@ func (m *IOstatCollector) Read(interval time.Duration, output chan lp.CCMessage)
 	if err != nil {
 		cclog.ComponentError(
 			m.name,
-			fmt.Sprintf("Read(): Failed to open file '%s': %v", IOSTATFILE, err))
+			fmt.Sprintf("Read(): Failed to open file '%s': %s", IOSTATFILE, err.Error()))
 		return
 	}
 	defer func() {
 		if err := file.Close(); err != nil {
 			cclog.ComponentError(
 				m.name,
-				fmt.Sprintf("Read(): Failed to close file '%s': %v", IOSTATFILE, err))
+				fmt.Sprintf("Read(): Failed to close file '%s': %s", IOSTATFILE, err.Error()))
 		}
 	}()
 
@@ -198,6 +201,11 @@ func (m *IOstatCollector) Read(interval time.Duration, output chan lp.CCMessage)
 		}
 		m.devices[device] = entry
 	}
+	if err := scanner.Err(); err != nil {
+		cclog.ComponentErrorf(
+			m.name,
+			"Read(): Failed to scan content of file %q: %s", IOSTATFILE, err.Error())
+	}
 }
 
 func (m *IOstatCollector) Close() {

collectors/ipmiMetric.go

@@ -28,13 +28,15 @@ type IpmiCollector struct {
 	metricCollector
 
 	config struct {
-		IpmitoolPath    string `json:"ipmitool_path"`
-		IpmisensorsPath string `json:"ipmisensors_path"`
-		Sudo            bool   `json:"use_sudo"`
+		IpmitoolPath    string   `json:"ipmitool_path"`
+		IpmisensorsPath string   `json:"ipmisensors_path"`
+		Sudo            bool     `json:"use_sudo"`
+		IncludeMetrics  []string `json:"include_metrics"`
 	}
 
-	ipmitool    string
-	ipmisensors string
+	ipmitool       string
+	ipmisensors    string
+	includeMetrics map[string]bool
 }
 
 func (m *IpmiCollector) Init(config json.RawMessage) error {
@@ -64,6 +66,15 @@ func (m *IpmiCollector) Init(config json.RawMessage) error {
 		}
 	}
 
+	// Read metrics to include
+	m.includeMetrics = make(map[string]bool)
+	for _, metric := range m.config.IncludeMetrics {
+		metric = strings.ToLower(strings.TrimSpace(metric))
+		if metric != "" {
+			m.includeMetrics[metric] = true
+		}
+	}
+
 	m.ipmitool = m.config.IpmitoolPath
 	m.ipmisensors = m.config.IpmisensorsPath
 
@@ -145,6 +156,11 @@ func (m *IpmiCollector) readIpmiTool(output chan lp.CCMessage) error {
 			continue
 		}
 		name := strings.ToLower(strings.ReplaceAll(strings.TrimSpace(lv[0]), " ", "_"))
+
+		if len(m.includeMetrics) > 0 && !m.includeMetrics[name] {
+			continue
+		}
+
 		unit := strings.TrimSpace(lv[2])
 		switch unit {
 		case "Volts":
@@ -165,6 +181,9 @@ func (m *IpmiCollector) readIpmiTool(output chan lp.CCMessage) error {
 		y.AddMeta("unit", unit)
 		output <- y
 	}
+	if err := scanner.Err(); err != nil {
+		return fmt.Errorf("failed to scan output of command: %s", err.Error())
+	}
 
 	// Wait for command end
 	if err := command.Wait(); err != nil {
@@ -209,6 +228,11 @@ func (m *IpmiCollector) readIpmiSensors(output chan lp.CCMessage) error {
 			continue
 		}
 		name := strings.ToLower(strings.ReplaceAll(lv[1], " ", "_"))
+
+		if len(m.includeMetrics) > 0 && !m.includeMetrics[name] {
+			continue
+		}
+
 		y, err := lp.NewMetric(name, map[string]string{"type": "node"}, m.meta, v, time.Now())
 		if err != nil {
 			cclog.ComponentErrorf(m.name, "Failed to create message: %v", err)

collectors/ipmiMetric.md

@@ -15,7 +15,8 @@ hugo_path: docs/reference/cc-metric-collector/collectors/ipmi.md
   "ipmistat": {
     "ipmitool_path": "/path/to/ipmitool",
     "ipmisensors_path": "/path/to/ipmi-sensors",
-    "use_sudo": true
+    "use_sudo": true,
+    "include_metrics" : []
   }
 ```
 
@@ -36,3 +37,5 @@ Defaults: monitoring !log_allowed, !pam_session
 monitoring ALL = (root) NOPASSWD:/usr/bin/ipmitool sensor
 monitoring ALL = (root) NOPASSWD:/usr/sbin/ipmi-sensors --comma-separated-output --sdr-cache-recreate
 ```
+
+If `include_ipmi_metrics` contains any entry, ipmistat collector will only submit these metrics. Any other values will get discarded. 

collectors/lenovoDensePower.go

@@ -0,0 +1,170 @@
+// Copyright (C) NHR@FAU, University Erlangen-Nuremberg.
+// All rights reserved.
+// Use of this source code is governed by a MIT-style
+// license that can be found in the LICENSE file.
+// additional authors:
+// Michael Panzlaff (NHR@FAU)
+
+package collectors
+
+import (
+	"bytes"
+	"encoding/hex"
+	"encoding/json"
+	"fmt"
+	"os/exec"
+	"strconv"
+	"strings"
+	"time"
+
+	cclog "github.com/ClusterCockpit/cc-lib/v2/ccLogger"
+	lp "github.com/ClusterCockpit/cc-lib/v2/ccMessage"
+)
+
+type LenovoDensePowerCollector struct {
+	metricCollector
+
+	config struct {
+		IpmitoolPath string `json:"ipmitool_path"`
+		Sudo         bool   `json:"use_sudo"`
+	}
+
+	ipmitool string
+
+	energyValLast  float64
+	energyTimeLast time.Time
+}
+
+func (m *LenovoDensePowerCollector) Init(config json.RawMessage) error {
+	// Check if already initialized
+	if m.init {
+		return nil
+	}
+
+	m.name = "LenovoDensePowerCollector"
+	if err := m.setup(); err != nil {
+		return fmt.Errorf("%s Init(): setup() call failed: %w", m.name, err)
+	}
+	m.meta = map[string]string{
+		"source": m.name,
+		"group":  "IPMI",
+	}
+
+	m.config.IpmitoolPath = "ipmitool"
+
+	if len(config) > 0 {
+		d := json.NewDecoder(bytes.NewReader(config))
+		d.DisallowUnknownFields()
+		if err := d.Decode(&m.config); err != nil {
+			return fmt.Errorf("%s Init(): Error decoding JSON config: %w", m.name, err)
+		}
+	}
+
+	m.ipmitool = m.config.IpmitoolPath
+
+	energyVal, energyTime, err := m.readEnergy()
+	if err != nil {
+		return fmt.Errorf("energy reading test failed: %w", err)
+	}
+
+	m.energyValLast = energyVal
+	m.energyTimeLast = energyTime
+	m.init = true
+
+	return nil
+}
+
+func (m *LenovoDensePowerCollector) readEnergy() (float64, time.Time, error) {
+	argv := make([]string, 0)
+	if m.config.Sudo {
+		argv = append(argv, "sudo", "-n")
+	}
+
+	// The Lenovo hardware wants this magic byte string
+	lenovoRequestEnergyMsg := []uint8{0x3a, 0x32, 4, 2, 0, 0, 0}
+
+	argv = append(argv, m.ipmitool, "raw")
+
+	for _, val := range lenovoRequestEnergyMsg {
+		argv = append(argv, strconv.Itoa(int(val)))
+	}
+
+	cmd := exec.Command(argv[0], argv[1:]...)
+
+	var stdout bytes.Buffer
+	var stderr bytes.Buffer
+	cmd.Stdout = &stdout
+	cmd.Stderr = &stderr
+
+	err := cmd.Run()
+	if err != nil {
+		return 0, time.Unix(0, 0), fmt.Errorf("failed to run ipmitool: %w (stdout=%s stderr=%s)", err, stdout.String(), stderr.String())
+	}
+
+	data, err := hex.DecodeString(strings.ReplaceAll(strings.TrimSpace(stdout.String()), " ", ""))
+	if err != nil {
+		return 0, time.Unix(0, 0), fmt.Errorf("unable to decode ipmitool hex output: %w (stdout=%s)", err, stdout.String())
+	}
+
+	if len(data) != 14 {
+		return 0, time.Unix(0, 0), fmt.Errorf("result must be 14 bytes as specified in the documentation")
+	}
+
+	// data is laid out like this:
+	// data[0 to 1]: FIFO index of value (for debug only)
+	// data[2 to 5]: Integer part of energy in J (little endian)
+	// data[6 to 7]: Fraction part of energy in mJ (little endian)
+	// data[8 to 11]: Integer part of Unix time of measurement in seconds (little endian)
+	// data[12 to 13]: Fraction part of Unix time of measurement in milliseconds (little endian)
+	wholeJoules := (uint32(data[2]) << 0) | (uint32(data[3]) << 8) | (uint32(data[4]) << 16) | (uint32(data[5]) << 24)
+	milliJoules := uint16(data[6]) | (uint16(data[7]) << 8)
+	finalJoules := float64(wholeJoules) + float64(milliJoules)*1e-3
+
+	wholeSeconds := (uint32(data[8]) << 0) | (uint32(data[9]) << 8) | (uint32(data[10]) << 16) | (uint32(data[11]) << 24)
+	milliSeconds := uint16(data[12]) | (uint16(data[13]) << 8)
+	finalTime := time.Unix(int64(wholeSeconds), (int64(milliSeconds) * 1000000))
+
+	return finalJoules, finalTime, nil
+}
+
+func (m *LenovoDensePowerCollector) Read(interval time.Duration, output chan lp.CCMessage) {
+	// Check if already initialized
+	if !m.init {
+		return
+	}
+
+	energyVal, energyTime, err := m.readEnergy()
+	if err != nil {
+		cclog.ComponentErrorf(m.name, "readEnergy failed: %v", err)
+		return
+	}
+
+	powerVal := 0.0
+	if energyTime.Compare(m.energyTimeLast) != 0 {
+		// Check for overflow
+		energyValDiff := int64(energyVal) - int64(m.energyValLast)
+		if energyVal < m.energyValLast {
+			energyValDiff += int64(0x100000000)
+		}
+		energyTimeDiff := energyTime.Sub(m.energyTimeLast)
+		if energyTime.Before(m.energyTimeLast) {
+			energyTimeDiff = energyTimeDiff + 0x100000000*time.Second
+		}
+		powerVal = float64(energyValDiff) / energyTimeDiff.Seconds()
+
+		m.energyValLast = energyVal
+		m.energyTimeLast = energyTime
+	}
+
+	metric, err := lp.NewMetric("lenovo_node_power", map[string]string{"type": "node"}, m.meta, powerVal, energyTime)
+	if err != nil {
+		cclog.ComponentErrorf(m.name, "lp.NewMetric failed: %v", err)
+		return
+	}
+	metric.AddMeta("unit", "Watts")
+	output <- metric
+}
+
+func (m *LenovoDensePowerCollector) Close() {
+	m.init = false
+}

collectors/lenovoDensePower.md

@@ -0,0 +1,51 @@
+<!--
+---
+title: Lenovo Dense Power collector
+description: Collect power of Lenovo Dense machines using ipmitool raw
+categories: [cc-metric-collector]
+tags: ['Admin']
+weight: 2
+hugo_path: docs/reference/cc-metric-collector/collectors/lenovoDensePower.md
+---
+-->
+
+## `lenovo_dense_power` collector
+
+```json
+  "lenovo_dense_power": {
+    "ipmitool_path": "/path/to/ipmitool",
+    "use_sudo": true,
+    "include_metrics" : []
+  }
+```
+
+The `lenovo_dense_power` collector reads power from Lenovo Dense machines via `ipmitool` (`ipmitool raw ...`). This collector is known to only work on the following machines. Others are not supported, so use at your *OWN* risk:
+
+System                                    | Compatibility             | Power measured
+---                                       | ---                       | ---
+Lenovo ThinkSystem SD650 V2/V3            | untested, but should work | node + riser1 + riser2
+Lenovo ThinkSystem SD650-N V2/ SD650-I V3 | untested, but should work | node + riser1 + riser2 + gpus
+Lenovo ThinkSystem SD665-N V3             | tested, known to work     | node + riser1 + riser2 + gpus
+
+To test if your system *may* be supported, you can run the following command *at your own risk*:
+
+```
+$ ipmitool raw 58 50 4 2 0 0 0
+ c4 00 83 a9 cb d3 a2 03 df db 47 6a d8 01
+```
+
+Exactly 14 bytes should be returned.
+In case not or another error occurs your hardware is likely not supported.
+
+In addition, `ipmitool` typically require root to run.
+In order to run `cc-metric-collector` without root priviliges, you can enable `use_sudo`.
+Add a file like this in `/etc/sudoers.d/` to allow `cc-metric-collector` to run the required commands:
+
+```
+# Do not log the following sudo commands from monitoring, since this causes a lot of log spam.
+# However keep log_denied enabled, to detect failures
+Defaults: monitoring !log_allowed, !pam_session
+
+# Allow to use ipmitool for Lenovo power readings
+monitoring ALL = (root) NOPASSWD:/usr/bin/ipmitool raw 58 50 4 2 0 0 0
+```

collectors/likwidMetric.go

@@ -38,7 +38,7 @@ import (
 	topo "github.com/ClusterCockpit/cc-metric-collector/pkg/ccTopology"
 	"github.com/NVIDIA/go-nvml/pkg/dl"
 	"github.com/fsnotify/fsnotify"
-	"golang.design/x/thread"
+	"golang.design/x/runtime/thread"
 )
 
 const (

collectors/megwareEureka.go

@@ -0,0 +1,194 @@
+// Copyright (C) NHR@FAU, University Erlangen-Nuremberg.
+// All rights reserved.
+// Use of this source code is governed by a MIT-style
+// license that can be found in the LICENSE file.
+// additional authors:
+// Michael Panzlaff (NHR@FAU)
+
+package collectors
+
+import (
+	"bytes"
+	"encoding/json"
+	"fmt"
+	"os/exec"
+	"time"
+
+	cclog "github.com/ClusterCockpit/cc-lib/v2/ccLogger"
+	lp "github.com/ClusterCockpit/cc-lib/v2/ccMessage"
+)
+
+// MPS refers to Monolithic Power Systems, from which the MP5922 is used
+// to measure telemetry on the Eureka platform.
+type mpsData struct {
+	Cnt         int64   `json:"Cnt"` // No idea what this is, ignore
+	Energy      float64 `json:"Energy"`
+	Vin         float64 `json:"Vin"`
+	Iin         float64 `json:"Iin"`
+	Pin         float64 `json:"Pin"`
+	PinAvg      float64 `json:"PinAvg"`
+	Vout        float64 `json:"Vout"`
+	Iout        float64 `json:"Iout"`
+	Pout        float64 `json:"Pout"`
+	StandbyVout float64 `json:"StandbyVout"`
+	StandbyIout float64 `json:"StandbyIout"`
+	StandbyPout float64 `json:"StandbyPout"`
+	TempBusbar  float64 `json:"TempBusbar"`
+	TempSsd     float64 `json:"TempSsd"`
+	TempMps     float64 `json:"TempMps"`
+	// No idea what the ones below mean exactl. Ignore them for now.
+	EnergyTime         int64 `json:"EnergyTime"`
+	EnergyAccumulator  int64 `json:"EnergyAccumulator"`
+	EnergyRolloverCnt  int64 `json:"EnergyRolloverCnt"`
+	EnergySampleCntU24 int64 `json:"EnergySampleCntU24"`
+
+	Timestamp time.Time
+}
+
+type MegwareEurekaCollector struct {
+	metricCollector
+
+	config struct {
+		U20Path string `json:"u20_path"`
+		Sudo    bool   `json:"use_sudo"`
+	}
+
+	u20path string
+
+	energyValLast  float64
+	energyTimeLast time.Time
+}
+
+func (m *MegwareEurekaCollector) Init(config json.RawMessage) error {
+	// Check if already initialized
+	if m.init {
+		return nil
+	}
+
+	m.name = "MegwareEurekaCollector"
+	if err := m.setup(); err != nil {
+		return fmt.Errorf("%s Init(): setup() call failed: %w", m.name, err)
+	}
+	m.meta = map[string]string{
+		"source": m.name,
+		"group":  "U20",
+	}
+
+	m.config.U20Path = "u20"
+
+	if len(config) > 0 {
+		d := json.NewDecoder(bytes.NewReader(config))
+		d.DisallowUnknownFields()
+		if err := d.Decode(&m.config); err != nil {
+			return fmt.Errorf("%s Init(): Error decoding JSON config: %w", m.name, err)
+		}
+	}
+
+	m.u20path = m.config.U20Path
+
+	data, err := m.readMpsData()
+	if err != nil {
+		return fmt.Errorf("energy reading test failed: %w", err)
+	}
+
+	m.energyValLast = data.Energy
+	m.energyTimeLast = time.Now()
+	m.init = true
+
+	return nil
+}
+
+func (m *MegwareEurekaCollector) readMpsData() (*mpsData, error) {
+	argv := make([]string, 0)
+	if m.config.Sudo {
+		argv = append(argv, "sudo", "-n")
+	}
+
+	argv = append(argv, m.u20path, "values", "--read", "GET_MPS_POLL_VALUES")
+
+	cmd := exec.Command(argv[0], argv[1:]...)
+
+	var stdout bytes.Buffer
+	var stderr bytes.Buffer
+	cmd.Stdout = &stdout
+	cmd.Stderr = &stderr
+
+	err := cmd.Run()
+	if err != nil {
+		return nil, fmt.Errorf("failed to run u20: %w (stdout=%s stderr=%s)", err, stdout.String(), stderr.String())
+	}
+
+	var u20output struct {
+		GetMpsPollValues mpsData `json:"GET_MPS_POLL_VALUES"`
+	}
+
+	err = json.Unmarshal(stdout.Bytes(), &u20output)
+	if err != nil {
+		return nil, fmt.Errorf("unable to decode u20 JSON output: %w (stdout=%s)", err, stdout.String())
+	}
+
+	u20output.GetMpsPollValues.Timestamp = time.Now()
+
+	return &u20output.GetMpsPollValues, nil
+}
+
+func (m *MegwareEurekaCollector) Read(interval time.Duration, output chan lp.CCMessage) {
+	// Check if already initialized
+	if !m.init {
+		return
+	}
+
+	data, err := m.readMpsData()
+	if err != nil {
+		cclog.ComponentErrorf(m.name, "readMpsData failed: %v", err)
+		return
+	}
+
+	powerVal := 0.0
+
+	if data.Timestamp.After(m.energyTimeLast) {
+		// Important, m.energy comes in Wh, so multiply by 3600 to get Ws (aka Joule)
+		energyValDiff := data.Energy - m.energyValLast
+		energyTimeDiff := data.Timestamp.Sub(m.energyTimeLast)
+		powerVal = energyValDiff * 3600 / energyTimeDiff.Seconds()
+
+		m.energyValLast = data.Energy
+		m.energyTimeLast = data.Timestamp
+	}
+
+	metricNamePrefix := "eureka_"
+	metricMap := map[string]struct {
+		value any
+		unit  string
+	}{
+		"power":        {value: powerVal, unit: "Watts"},
+		"vin":          {value: data.Vin, unit: "Volts"},
+		"iin":          {value: data.Iin, unit: "Amperes"},
+		"pin":          {value: data.Pin, unit: "Watts"},
+		"pin_avg":      {value: data.PinAvg, unit: "Watts"},
+		"vout":         {value: data.Vout, unit: "Volts"},
+		"iout":         {value: data.Iout, unit: "Amperes"},
+		"pout":         {value: data.Pout, unit: "Watts"},
+		"standby_vout": {value: data.StandbyVout, unit: "Volts"},
+		"standby_iout": {value: data.StandbyIout, unit: "Amperes"},
+		"standby_pout": {value: data.StandbyPout, unit: "Watts"},
+		"temp_busbar":  {value: data.TempBusbar, unit: "degC"},
+		"temp_ssd":     {value: data.TempSsd, unit: "degC"},
+		"temp_mps":     {value: data.TempMps, unit: "degC"},
+	}
+
+	for metricName, metricData := range metricMap {
+		metricName = metricNamePrefix + metricName
+		metric, err := lp.NewMetric(metricName, map[string]string{"type": "node"}, m.meta, metricData.value, data.Timestamp)
+		if err != nil {
+			cclog.ComponentErrorf(m.name, "lp.NewMetric failed: %v", err)
+			return
+		}
+		metric.AddMeta("unit", metricData.unit)
+		output <- metric
+	}
+}
+
+func (m *MegwareEurekaCollector) Close() {
+	m.init = false
+}

collectors/megwareEureka.md

@@ -0,0 +1,44 @@
+<!--
+---
+title: Megware Eureka collector
+description: Collect power and other metrics of Megware Eureka machines using u20
+categories: [cc-metric-collector]
+tags: ['Admin']
+weight: 2
+hugo_path: docs/reference/cc-metric-collector/collectors/lenovoDensePower.md
+---
+-->
+
+## `lenovo_dense_power` collector
+
+```json
+  "megware_eureka": {
+    "u20_path": "/path/to/ipmitool",
+    "use_sudo": true
+  }
+```
+
+The `megware_eureka` collector reads power and other metrics from Megware Eureka machines via `u20`.
+If the u20 tool is available for your machines, it's possible that this collector is compatible.
+If you don't have access to u20, please contact your Megware sales person.
+
+You can test the collector compatibility by running the following command:
+
+```
+$ u20 values --read GET_MPS_POLL_VALUES
+```
+
+If this returns a JSON with energy, voltage and current readings, you're fine.
+
+In addition, `u20` typically requires root to run.
+In order to run `cc-metric-collector` without root priviliges, you can enable `use_sudo`.
+Add a file like this in `/etc/sudoers.d/` to allow `cc-metric-collector` to run the required commands:
+
+```
+# Do not log the following sudo commands from monitoring, since this causes a lot of log spam.
+# However keep log_denied enabled, to detect failures
+Defaults: monitoring !log_allowed, !pam_session
+
+# Allow to use u20 for Megware power readings
+monitoring ALL = (root) NOPASSWD:/usr/bin/u20 values --read GET_MPS_POLL_VALUES
+```

collectors/raplMetric.go

@@ -22,24 +22,15 @@ import (
 )
 
 // running average power limit (RAPL) monitoring attributes for a zone
-// Only for Intel systems
-
 type RAPLZoneInfo struct {
-	energy            int64     // current reading of the energy counter in micro joules
-	maxEnergyRange    int64     // Range of the above energy counter in micro-joules
-	energyTimestamp   time.Time // timestamp when energy counter was read
-	energyFilepath    string    // path to a file containing the zones current energy counter in micro joules
-	shortTermFilepath string    // path to short term power limit
-	longTermFilepath  string    // path to long term power limit
-	enabledFilepath   string    // path to check whether limits are enabled
-	name              string
-
 	// tags describing the RAPL zone:
 	// * zone_name, subzone_name: e.g. psys, dram, core, uncore, package-0
 	// * zone_id: e.g. 0:1 (zone 0 sub zone 1)
-	// type=socket for dram, core, uncore, package-* and type=node for psys
-	// type-id=socket id
-	tags map[string]string
+	tags            map[string]string
+	energyFilepath  string    // path to a file containing the zones current energy counter in micro joules
+	energy          int64     // current reading of the energy counter in micro joules
+	energyTimestamp time.Time // timestamp when energy counter was read
+	maxEnergyRange  int64     // Range of the above energy counter in micro-joules
 }
 
 type RAPLCollector struct {
@@ -51,40 +42,12 @@ type RAPLCollector struct {
 		// * 0:1 for zone 0 subzone 1
 		ExcludeByID []string `json:"exclude_device_by_id,omitempty"`
 		// Exclude names for RAPL zones, e.g. psys, dram, core, uncore, package-0
-		ExcludeByName     []string `json:"exclude_device_by_name,omitempty"`
-		SkipEnergyReading bool     `json:"skip_energy_reading,omitempty"`
-		SkipLimitsReading bool     `json:"skip_limits_reading,omitempty"`
-		OnlyEnabledLimits bool     `json:"only_enabled_limits,omitempty"`
+		ExcludeByName []string `json:"exclude_device_by_name,omitempty"`
 	}
-	raplZoneInfo []RAPLZoneInfo
+	RAPLZoneInfo []RAPLZoneInfo
 	meta         map[string]string // default meta information
 }
 
-// Get the path to the power limit file for zone selectable by limit name
-// Common limit names for Intel systems are
-// - long_term
-// - short_term
-// Does not support AMD as AMD systems do not provide the power limits
-// through sysfs
-func ZoneLimitFile(folder string, limit_name string) string {
-	nameGlob := filepath.Join(folder, "constraint_*_name")
-	candidates, err := filepath.Glob(nameGlob)
-	if err == nil {
-		for _, c := range candidates {
-			if v, err := os.ReadFile(c); err == nil {
-				if strings.TrimSpace(string(v)) == limit_name {
-					var i int
-					n, err := fmt.Sscanf(filepath.Base(c), "constraint_%d_name", &i)
-					if err == nil && n == 1 {
-						return filepath.Join(folder, fmt.Sprintf("constraint_%d_power_limit_uw", i))
-					}
-				}
-			}
-		}
-	}
-	return ""
-}
-
 // Init initializes the running average power limit (RAPL) collector
 func (m *RAPLCollector) Init(config json.RawMessage) error {
 	// Check if already initialized
@@ -104,9 +67,6 @@ func (m *RAPLCollector) Init(config json.RawMessage) error {
 	}
 
 	// Read in the JSON configuration
-	m.config.SkipEnergyReading = false
-	m.config.SkipLimitsReading = false
-	m.config.OnlyEnabledLimits = true
 	if len(config) > 0 {
 		d := json.NewDecoder(bytes.NewReader(config))
 		d.DisallowUnknownFields()
@@ -133,63 +93,49 @@ func (m *RAPLCollector) Init(config json.RawMessage) error {
 	// See: https://www.kernel.org/doc/html/latest/power/powercap/powercap.html#monitoring-attributes
 	readZoneInfo := func(zonePath string) (
 		z struct {
-			name              string    // zones name e.g. psys, dram, core, uncore, package-0
-			energyFilepath    string    // path to a file containing the zones current energy counter in micro joules
-			energy            int64     // current reading of the energy counter in micro joules
-			energyTimestamp   time.Time // timestamp when energy counter was read
-			maxEnergyRange    int64     // Range of the above energy counter in micro-joules
-			shortTermFilepath string
-			longTermFilepath  string
-			enabledFilepath   string
+			name            string    // zones name e.g. psys, dram, core, uncore, package-0
+			energyFilepath  string    // path to a file containing the zones current energy counter in micro joules
+			energy          int64     // current reading of the energy counter in micro joules
+			energyTimestamp time.Time // timestamp when energy counter was read
+			maxEnergyRange  int64     // Range of the above energy counter in micro-joules
+			ok              bool      // Are all information available?
 		},
 	) {
 		// zones name e.g. psys, dram, core, uncore, package-0
-
-		if v, err :=
-			os.ReadFile(
-				filepath.Join(zonePath, "name")); err == nil {
+		foundName := false
+		if v, err := os.ReadFile(
+			filepath.Join(zonePath, "name")); err == nil {
+			foundName = true
 			z.name = strings.TrimSpace(string(v))
 		}
 
-		if !m.config.SkipEnergyReading {
-			// path to a file containing the zones current energy counter in micro joules
-			z.energyFilepath = filepath.Join(zonePath, "energy_uj")
-			// current reading of the energy counter in micro joules
-			if v, err := os.ReadFile(z.energyFilepath); err == nil {
-				if i, err := strconv.ParseInt(strings.TrimSpace(string(v)), 10, 64); err == nil {
-					z.energy = i
-					// timestamp when energy counter was read
-					z.energyTimestamp = time.Now()
-				}
-			} else {
-				cclog.ComponentErrorf(m.name, "Cannot read energy file for %s: %v", z.name, err.Error())
+		// path to a file containing the zones current energy counter in micro joules
+		z.energyFilepath = filepath.Join(zonePath, "energy_uj")
+
+		// current reading of the energy counter in micro joules
+		foundEnergy := false
+		if v, err := os.ReadFile(z.energyFilepath); err == nil {
+			// timestamp when energy counter was read
+			z.energyTimestamp = time.Now()
+			if i, err := strconv.ParseInt(strings.TrimSpace(string(v)), 10, 64); err == nil {
+				foundEnergy = true
+				z.energy = i
 			}
-			// Range of the above energy counter in micro-joules
-			if v, err :=
-				os.ReadFile(
-					filepath.Join(zonePath, "max_energy_range_uj")); err == nil {
-				if i, err := strconv.ParseInt(strings.TrimSpace(string(v)), 10, 64); err == nil {
-					z.maxEnergyRange = i
-				}
-			}
-		} else {
-			cclog.ComponentDebugf(m.name, "Energy readings for %s disabled", zonePath)
 		}
 
-		if !m.config.SkipLimitsReading {
-			z.shortTermFilepath = ZoneLimitFile(zonePath, "short_term")
-			if _, err := os.Stat(z.shortTermFilepath); err != nil {
-				z.shortTermFilepath = ""
+		// Range of the above energy counter in micro-joules
+		foundMaxEnergyRange := false
+		if v, err := os.ReadFile(
+			filepath.Join(zonePath, "max_energy_range_uj")); err == nil {
+			if i, err := strconv.ParseInt(strings.TrimSpace(string(v)), 10, 64); err == nil {
+				foundMaxEnergyRange = true
+				z.maxEnergyRange = i
 			}
-			z.longTermFilepath = ZoneLimitFile(zonePath, "long_term")
-			if _, err := os.Stat(z.longTermFilepath); err != nil {
-				z.longTermFilepath = ""
-			}
-			z.enabledFilepath = filepath.Join(zonePath, "enabled")
-		} else {
-			cclog.ComponentDebugf(m.name, "Power limit readings for %s disabled", zonePath)
 		}
 
+		// Are all information available?
+		z.ok = foundName && foundEnergy && foundMaxEnergyRange
+
 		return
 	}
 
@@ -206,36 +152,14 @@ func (m *RAPLCollector) Init(config json.RawMessage) error {
 
 	for _, zonePath := range zonesPath {
 		zoneID := strings.TrimPrefix(zonePath, zonePrefix)
-
 		z := readZoneInfo(zonePath)
-		if !isIDExcluded[zoneID] &&
+		if z.ok &&
+			!isIDExcluded[zoneID] &&
 			!isNameExcluded[z.name] {
 
-			si := RAPLZoneInfo{
-				tags:              make(map[string]string),
-				energyFilepath:    z.energyFilepath,
-				energy:            z.energy,
-				energyTimestamp:   z.energyTimestamp,
-				maxEnergyRange:    z.maxEnergyRange,
-				shortTermFilepath: z.shortTermFilepath,
-				longTermFilepath:  z.longTermFilepath,
-				enabledFilepath:   z.enabledFilepath,
-				name:              z.name,
-			}
-			si.tags["type"] = "node"
-			si.tags["type-id"] = "0"
-			var pid int = 0
-			if strings.HasPrefix(z.name, "package-") {
-				n, err := fmt.Sscanf(z.name, "package-%d", &pid)
-				if err == nil && n == 1 {
-					si.tags["type-id"] = fmt.Sprintf("%d", pid)
-					si.tags["type"] = "socket"
-				}
-				si.name = "pkg"
-			}
 			// Add RAPL monitoring attributes for a zone
-			m.raplZoneInfo = append(
-				m.raplZoneInfo,
+			m.RAPLZoneInfo = append(
+				m.RAPLZoneInfo,
 				RAPLZoneInfo{
 					tags: map[string]string{
 						"id":        zoneID,
@@ -258,40 +182,37 @@ func (m *RAPLCollector) Init(config json.RawMessage) error {
 		for _, subZonePath := range subZonesPath {
 			subZoneID := strings.TrimPrefix(subZonePath, subZonePrefix)
 			sz := readZoneInfo(subZonePath)
-
 			if len(zoneID) > 0 && len(z.name) > 0 &&
+				sz.ok &&
 				!isIDExcluded[zoneID+":"+subZoneID] &&
 				!isNameExcluded[sz.name] {
-				m.raplZoneInfo = append(
-					m.raplZoneInfo,
+				m.RAPLZoneInfo = append(
+					m.RAPLZoneInfo,
 					RAPLZoneInfo{
 						tags: map[string]string{
 							"id":            zoneID + ":" + subZoneID,
 							"zone_name":     z.name,
 							"sub_zone_name": sz.name,
 						},
-						energyFilepath:    sz.energyFilepath,
-						energy:            sz.energy,
-						energyTimestamp:   sz.energyTimestamp,
-						maxEnergyRange:    sz.maxEnergyRange,
-						shortTermFilepath: sz.shortTermFilepath,
-						longTermFilepath:  sz.longTermFilepath,
-						enabledFilepath:   sz.enabledFilepath,
-						name:              sz.name,
+						energyFilepath:  sz.energyFilepath,
+						energy:          sz.energy,
+						energyTimestamp: sz.energyTimestamp,
+						maxEnergyRange:  sz.maxEnergyRange,
 					})
 			}
 		}
 	}
 
-	if m.raplZoneInfo == nil {
+	if m.RAPLZoneInfo == nil {
 		return fmt.Errorf("no running average power limit (RAPL) device found in %s", controlTypePath)
 	}
 
 	// Initialized
 	cclog.ComponentDebug(
 		m.name,
-		"initialized %d zones with running average power limit (RAPL) monitoring attributes",
-		len(m.raplZoneInfo))
+		"initialized",
+		len(m.RAPLZoneInfo),
+		"zones with running average power limit (RAPL) monitoring attributes")
 	m.init = true
 
 	return err
@@ -300,89 +221,35 @@ func (m *RAPLCollector) Init(config json.RawMessage) error {
 // Read reads running average power limit (RAPL) monitoring attributes for all initialized zones
 // See: https://www.kernel.org/doc/html/latest/power/powercap/powercap.html#monitoring-attributes
 func (m *RAPLCollector) Read(interval time.Duration, output chan lp.CCMessage) {
-	for i := range m.raplZoneInfo {
-		p := &m.raplZoneInfo[i]
+	for i := range m.RAPLZoneInfo {
+		p := &m.RAPLZoneInfo[i]
 
-		if !m.config.SkipEnergyReading {
-			// Read current value of the energy counter in micro joules
-			if v, err := os.ReadFile(p.energyFilepath); err == nil {
-				energyTimestamp := time.Now()
-				if i, err := strconv.ParseInt(strings.TrimSpace(string(v)), 10, 64); err == nil {
-					energy := i
+		// Read current value of the energy counter in micro joules
+		if v, err := os.ReadFile(p.energyFilepath); err == nil {
+			energyTimestamp := time.Now()
+			if i, err := strconv.ParseInt(strings.TrimSpace(string(v)), 10, 64); err == nil {
+				energy := i
 
-					// Compute average power (Δ energy / Δ time)
-					energyDiff := energy - p.energy
-					if energyDiff < 0 {
-						// Handle overflow:
-						// ( p.maxEnergyRange - p.energy ) + energy
-						// = p.maxEnergyRange + ( energy - p.energy )
-						// = p.maxEnergyRange + diffEnergy
-						energyDiff += p.maxEnergyRange
-					}
-					timeDiff := energyTimestamp.Sub(p.energyTimestamp)
-					averagePower := float64(energyDiff) / float64(timeDiff.Microseconds())
-
-					y, err := lp.NewMetric(
-						fmt.Sprintf("rapl_%s_average_power", p.name),
-						p.tags,
-						m.meta,
-						averagePower,
-						energyTimestamp)
-					if err == nil {
-						output <- y
-					}
-
-					e, err := lp.NewMetric(
-						fmt.Sprintf("rapl_%s_energy", p.name),
-						p.tags,
-						m.meta,
-						float64(energyDiff)*1e-3,
-						energyTimestamp)
-					if err == nil {
-						e.AddMeta("unit", "Joules")
-						output <- e
-					}
-
-					// Save current energy counter state
-					p.energy = energy
-					p.energyTimestamp = energyTimestamp
+				// Compute average power (Δ energy / Δ time)
+				energyDiff := energy - p.energy
+				if energyDiff < 0 {
+					// Handle overflow:
+					// ( p.maxEnergyRange - p.energy ) + energy
+					// = p.maxEnergyRange + ( energy - p.energy )
+					// = p.maxEnergyRange + diffEnergy
+					energyDiff += p.maxEnergyRange
 				}
-			}
-		}
-		// https://www.kernel.org/doc/html/latest/power/powercap/powercap.html#constraints
-		if !m.config.SkipLimitsReading {
-			skip := false
-			if m.config.OnlyEnabledLimits {
-				if v, err := os.ReadFile(p.enabledFilepath); err == nil {
-					if strings.TrimSpace(string(v)) == "0" {
-						skip = true
-					}
-				}
-			}
-			if !skip {
-				if len(p.shortTermFilepath) > 0 {
-					if v, err := os.ReadFile(p.shortTermFilepath); err == nil {
-						if i, err := strconv.ParseInt(strings.TrimSpace(string(v)), 10, 64); err == nil {
-							name := fmt.Sprintf("rapl_%s_limit_short_term", p.name)
-							y, err := lp.NewMetric(name, p.tags, m.meta, i/1e6, time.Now())
-							if err == nil {
-								output <- y
-							}
-						}
-					}
+				timeDiff := energyTimestamp.Sub(p.energyTimestamp)
+				averagePower := float64(energyDiff) / float64(timeDiff.Microseconds())
+
+				y, err := lp.NewMetric("rapl_average_power", p.tags, m.meta, averagePower, energyTimestamp)
+				if err == nil {
+					output <- y
 				}
 
-				if len(p.longTermFilepath) > 0 {
-					if v, err := os.ReadFile(p.longTermFilepath); err == nil {
-						if i, err := strconv.ParseInt(strings.TrimSpace(string(v)), 10, 64); err == nil {
-							name := fmt.Sprintf("rapl_%s_limit_long_term", p.name)
-							y, err := lp.NewMetric(name, p.tags, m.meta, i/1e6, time.Now())
-							if err == nil {
-								output <- y
-							}
-						}
-					}
-				}
+				// Save current energy counter state
+				p.energy = energy
+				p.energyTimestamp = energyTimestamp
 			}
 		}
 	}

collectors/raplMetric.md

@@ -11,24 +11,16 @@ hugo_path: docs/reference/cc-metric-collector/collectors/rapl.md
 
 ## `rapl` collector
 
-This collector reads running average power limit (RAPL) monitoring attributes to compute average power consumption metrics. See <https://www.kernel.org/doc/html/latest/power/powercap/powercap.html>.
+This collector reads running average power limit (RAPL) monitoring attributes to compute average power consumption metrics. See <https://www.kernel.org/doc/html/latest/power/powercap/powercap.html#monitoring-attributes>.
+
+The Likwid metric collector provides similar functionality.
 
 ```json
   "rapl": {
     "exclude_device_by_id": ["0:1", "0:2"],
-    "exclude_device_by_name": ["psys"],
-    "skip_energy_reading": false,
-    "skip_limits_reading": false,
-    "only_enabled_limits": true
+    "exclude_device_by_name": ["psys"]
   }
 ```
 
 Metrics:
-* `rapl_<domain>_average_power`: average power consumption in Watt. The average is computed over the entire runtime from the last measurement to the current measurement
-* `rapl_<domain>_energy`: Difference from the last measurement
-* `rapl_<domain>_limit_short_term`: Short term powercap setting for the domain
-* `rapl_<domain>_limit_long_term`: Long term powercap setting for the domain
-
-Only the `rapl_<domain>_average_power` and `rapl_<domain>_energy` metrics require root-permissions. The limits can be read as user. Some domains have limits available but they are not enabled. By default, only enabled domain limits are collected.
-
-Energy and power measurments can also be done with the Likwid metric collector.
+* `rapl_average_power`: average power consumption in Watt. The average is computed over the entire runtime from the last measurement to the current measurement

collectors/slurmCgroupMetric.go

@@ -7,6 +7,7 @@ import (
 	"os/exec"
 	"os/user"
 	"path/filepath"
+	"regexp"
 	"strconv"
 	"strings"
 	"time"
@@ -45,6 +46,37 @@ type SlurmCgroupCollector struct {
 
 const defaultCgroupBase = "/sys/fs/cgroup/system.slice/slurmstepd.scope"
 
+var (
+	// Slurm cgroup v2 directory layout:
+	// - Slurm <= 25.11: job_<numeric job id>
+	// - Slurm >= 26.05: SLUID, encoded as "s" + 13 Crockford Base32 characters
+	jobIDDirRE = regexp.MustCompile(`^job_[0-9]+$`)
+	sluidDirRE = regexp.MustCompile(`(?i)^s[0-9A-HJKMNP-TV-Z]{13}$`)
+)
+
+func (m *SlurmCgroupCollector) findSlurmJobDirs() ([]string, error) {
+	entries, err := os.ReadDir(m.cgroupBase)
+	if err != nil {
+		return nil, err
+	}
+
+	jobDirs := make([]string, 0)
+
+	for _, entry := range entries {
+		if !entry.IsDir() {
+			continue
+		}
+
+		name := entry.Name()
+
+		if jobIDDirRE.MatchString(name) || sluidDirRE.MatchString(name) {
+			jobDirs = append(jobDirs, filepath.Join(m.cgroupBase, name))
+		}
+	}
+
+	return jobDirs, nil
+}
+
 func ParseCPUs(cpuset string) ([]int, error) {
 	var result []int
 	if cpuset == "" {
@@ -237,10 +269,9 @@ func (m *SlurmCgroupCollector) Read(interval time.Duration, output chan lp.CCMes
 		delete(m.cpuUsed, k)
 	}
 
-	globPattern := filepath.Join(m.cgroupBase, "job_*")
-	jobDirs, err := filepath.Glob(globPattern)
+	jobDirs, err := m.findSlurmJobDirs()
 	if err != nil {
-		cclog.ComponentError(m.name, "Error globbing job directories:", err.Error())
+		cclog.ComponentError(m.name, "Error reading job directories:", err.Error())
 		return
 	}
 

go.mod

@@ -5,11 +5,11 @@ go 1.25.0
 require (
 	github.com/ClusterCockpit/cc-lib/v2 v2.12.0
 	github.com/ClusterCockpit/go-rocm-smi v0.4.0
-	github.com/NVIDIA/go-nvml v0.13.0-1
+	github.com/NVIDIA/go-nvml v0.13.2-0
 	github.com/PaesslerAG/gval v1.2.4
 	github.com/fsnotify/fsnotify v1.10.1
 	github.com/tklauser/go-sysconf v0.4.0
-	golang.design/x/thread v0.3.2
+	golang.design/x/runtime v0.3.0
 	golang.org/x/sys v0.45.0
 )
 

go.sum

@@ -12,8 +12,9 @@ github.com/Microsoft/go-winio v0.6.1 h1:9/kr64B9VUZrLm5YYwbGtUJnMgqWVOdUAXu6Migc
 github.com/Microsoft/go-winio v0.6.1/go.mod h1:LRdKpFKfdobln8UmuiYcKPot9D2v6svN5+sAH+4kjUM=
 github.com/Microsoft/hcsshim v0.11.4 h1:68vKo2VN8DE9AdN4tnkWnmdhqdbpUFM8OF3Airm7fz8=
 github.com/Microsoft/hcsshim v0.11.4/go.mod h1:smjE4dvqPX9Zldna+t5FG3rnoHhaB7QYxPRqGcpAD9w=
-github.com/NVIDIA/go-nvml v0.13.0-1 h1:OLX8Jq3dONuPOQPC7rndB6+iDmDakw0XTYgzMxObkEw=
 github.com/NVIDIA/go-nvml v0.13.0-1/go.mod h1:+KNA7c7gIBH7SKSJ1ntlwkfN80zdx8ovl4hrK3LmPt4=
+github.com/NVIDIA/go-nvml v0.13.2-0 h1:7M4cFG62wSUHw8i0XSiNU7ejKODytTS6ZrW/vgB2NSI=
+github.com/NVIDIA/go-nvml v0.13.2-0/go.mod h1:ahi2psRYoa+wYUBIrZPRO+wJs9lcvMhxSSkjjvsJJNQ=
 github.com/PaesslerAG/gval v1.2.4 h1:rhX7MpjJlcxYwL2eTTYIOBUyEKZ+A96T9vQySWkVUiU=
 github.com/PaesslerAG/gval v1.2.4/go.mod h1:XRFLwvmkTEdYziLdaCeCa5ImcGVrfQbeNUbVR+C6xac=
 github.com/PaesslerAG/jsonpath v0.1.0 h1:gADYeifvlqK3R3i2cR5B4DGgxLXIPb3TRTH1mGi0jPI=
@@ -173,8 +174,8 @@ go.uber.org/goleak v1.3.0 h1:2K3zAYmnTNqV73imy9J1T3WC+gmCePx2hEGkimedGto=
 go.uber.org/goleak v1.3.0/go.mod h1:CoHD4mav9JJNrW/WLlf7HGZPjdw8EucARQHekz1X6bE=
 go.yaml.in/yaml/v2 v2.4.4 h1:tuyd0P+2Ont/d6e2rl3be67goVK4R6deVxCUX5vyPaQ=
 go.yaml.in/yaml/v2 v2.4.4/go.mod h1:gMZqIpDtDqOfM0uNfy0SkpRhvUryYH0Z6wdMYcacYXQ=
-golang.design/x/thread v0.3.2 h1:FmD1glspGrQCe6FuQLmSrT6wz2CSzq7vKVDluyiMnqo=
-golang.design/x/thread v0.3.2/go.mod h1:6+Hi2rMOgMHZdKDWaqNHyWtoFUx1HxZ06LfHPh5Z/hQ=
+golang.design/x/runtime v0.3.0 h1:8bA+GQfO8A18JXJQlQA56pEc+Sgrbo4cmLzjzmJ58ZI=
+golang.design/x/runtime v0.3.0/go.mod h1:PjVKQjImLdSrvjIw4FmrnCPq9BGs5PMBHb8i6b2BN9I=
 golang.org/x/crypto v0.50.0 h1:zO47/JPrL6vsNkINmLoo/PH1gcxpls50DNogFvB5ZGI=
 golang.org/x/crypto v0.50.0/go.mod h1:3muZ7vA7PBCE6xgPX7nkzzjiUq87kRItoJQM1Yo8S+Q=
 golang.org/x/exp v0.0.0-20231005195138-3e424a577f31 h1:9k5exFQKQglLo+RoP+4zMjOFE14P6+vyR0baDAi0Rcs=

internal/metricAggregator/metricAggregator.go

@@ -128,7 +128,7 @@ func (c *metricAggregator) Eval(starttime time.Time, endtime time.Time, metrics
 	vars["starttime"] = starttime
 	vars["endtime"] = endtime
 	for _, f := range c.functions {
-		cclog.ComponentDebug("MetricCache", "COLLECT", f.Name, "COND", f.Condition)
+		cclog.ComponentDebugf("MetricCache", "COLLECT %s COND '%s'", f.Name, f.Condition)
 		var valuesFloat64 []float64
 		var valuesFloat32 []float32
 		var valuesInt []int
@@ -140,7 +140,7 @@ func (c *metricAggregator) Eval(starttime time.Time, endtime time.Time, metrics
 			vars["metric"] = m
 			value, err := f.gvalCond.EvalBool(context.Background(), vars)
 			if err != nil {
-				cclog.ComponentError("MetricCache", "COLLECT", f.Name, "COND", f.Condition, ":", err.Error())
+				cclog.ComponentErrorf("MetricCache", "COLLECT %s COND '%s' : %s", f.Name, f.Condition, err.Error())
 				continue
 			}
 			if value {
@@ -160,7 +160,7 @@ func (c *metricAggregator) Eval(starttime time.Time, endtime time.Time, metrics
 					case bool:
 						valuesBool = append(valuesBool, x)
 					default:
-						cclog.ComponentError("MetricCache", "COLLECT ADD VALUE", v, "FAILED")
+						cclog.ComponentErrorf("MetricCache", "COLLECT ADD VALUE %v FAILED", v)
 					}
 				}
 				matches = append(matches, m)
@@ -213,13 +213,13 @@ func (c *metricAggregator) Eval(starttime time.Time, endtime time.Time, metrics
 			vars["values"] = valuesBool
 			len_values = len(valuesBool)
 		}
-		cclog.ComponentDebug("MetricCache", "EVALUATE", f.Name, "METRICS", len_values, "CALC", f.Function)
+		cclog.ComponentDebugf("MetricCache", "EVALUATE %s METRICS %d CALC '%s'", f.Name, len_values, f.Function)
 
 		vars["metrics"] = matches
 		if len_values > 0 {
 			value, err := gval.Evaluate(f.Function, vars, c.language)
 			if err != nil {
-				cclog.ComponentError("MetricCache", "EVALUATE", f.Name, "METRICS", len_values, "CALC", f.Function, ":", err.Error())
+				cclog.ComponentErrorf("MetricCache", "EVALUATE %s METRICS %d CALC '%s': %s", f.Name, len_values, f.Function, err.Error())
 				break
 			}
 
@@ -273,12 +273,12 @@ func (c *metricAggregator) Eval(starttime time.Time, endtime time.Time, metrics
 			case string:
 				m, err = lp.NewMessage(f.Name, tags, meta, map[string]any{"value": t}, starttime)
 			default:
-				cclog.ComponentError("MetricCache", "Gval returned invalid type", t, "skipping metric", f.Name)
+				cclog.ComponentErrorf("MetricCache", "Gval returned invalid type %s skipping metric %s", t, f.Name)
 			}
 			if err != nil {
-				cclog.ComponentError("MetricCache", "Cannot create metric from Gval result", value, ":", err.Error())
+				cclog.ComponentErrorf("MetricCache", "Cannot create metric from Gval result %v: %s", value, err.Error())
 			}
-			cclog.ComponentDebug("MetricCache", "SEND", m)
+			cclog.ComponentDebugf("MetricCache", "SEND %s", m.ToLineProtocol(nil))
 			select {
 			case c.output <- m:
 			default:
@@ -295,12 +295,12 @@ func (c *metricAggregator) AddAggregation(name, function, condition string, tags
 	newcond := strings.ReplaceAll(condition, "'", "\"")
 	gvalCond, err := gval.Full(metricCacheLanguage).NewEvaluable(newcond)
 	if err != nil {
-		cclog.ComponentError("MetricAggregator", "Cannot add aggregation, invalid if condition", newcond, ":", err.Error())
+		cclog.ComponentErrorf("MetricAggregator", "Cannot add aggregation, invalid if condition '%s': %s", newcond, err.Error())
 		return err
 	}
 	gvalFunc, err := gval.Full(metricCacheLanguage).NewEvaluable(newfunc)
 	if err != nil {
-		cclog.ComponentError("MetricAggregator", "Cannot add aggregation, invalid function condition", newfunc, ":", err.Error())
+		cclog.ComponentErrorf("MetricAggregator", "Cannot add aggregation, invalid function condition %s: %s", newfunc, err.Error())
 		return err
 	}
 	for _, agg := range c.functions {