#==============================================================================
#                            Laminar Canal Flow
#==============================================================================

# Problem specific Data:
# ---------------------

name backstep             # name of flow setup

bcTop      1			#  flags for boundary conditions
bcBottom   1			#  1 = no-slip      3 = outflow
bcLeft     3			#  2 = free-slip    4 = periodic
bcRight    3			#

gx    0.0      # Body forces (e.g. gravity)
gy    0.0      #

re    36000.0	   # Reynolds number

u_init    1.0      # initial value for velocity in x-direction
v_init    0.0      # initial value for velocity in y-direction
p_init    1.0      # initial value for pressure

# Geometry Data:
# -------------

xlength    7.0     # domain size in x-direction
ylength    1.5	   # domain size in y-direction
imax       200     # number of interior cells in x-direction
jmax       40	   # number of interior cells in y-direction

# Time Data:
# ---------

te      60.0    # final time
dt      0.02    # time stepsize
tau     0.5     # safety factor for time stepsize control (<0 constant delt)

# Pressure Iteration Data:
# -----------------------

itermax  500       # maximal number of pressure iteration in one time step
eps      0.0001    # stopping tolerance for pressure iteration
rho      0.52
omg      1.7       # relaxation parameter for SOR iteration
gamma    0.9       # upwind differencing factor gamma

# Multigrid data:
# ---------

levels        3         # Multigrid levels
presmooth     55        # Pre-smoothning iterations
postsmooth    5         # Post-smoothning iterations

# Particle Tracing Data:
# -----------------------

numberOfParticles   500
startTime           0     #if you want to see particles trapped in recirculation zone, startTime should be set to 0 
injectTimePeriod    1.0
writeTimePeriod     0.5

x1                  0.0
y1                  0.5
x2                  0.0
y2                  1.5

# Obstacle Geometry Data:
# -----------------------
# Shape 0 disable, 1 Rectangle/Square, 2 Circle

shape               1 
xCenter             0.0
yCenter             0.0
xRectLength         2.0
yRectLength         1.0
circleRadius        1.0

#===============================================================================