EnhancedSolver port complete

EnhancedSolver/2D-mpi/backstep.par

@@ -0,0 +1,79 @@
+#==============================================================================
+#                            Laminar Canal Flow
+#==============================================================================
+
+# Problem specific Data:
+# ---------------------
+
+name backstep             # name of flow setup
+
+bcTop      1			#  flags for boundary conditions
+bcBottom   1			#  1 = no-slip      3 = outflow
+bcLeft     3			#  2 = free-slip    4 = periodic
+bcRight    3			#
+
+gx    0.0      # Body forces (e.g. gravity)
+gy    0.0      #
+
+re    36000.0	   # Reynolds number
+
+u_init    1.0      # initial value for velocity in x-direction
+v_init    0.0      # initial value for velocity in y-direction
+p_init    1.0      # initial value for pressure
+
+# Geometry Data:
+# -------------
+
+xlength    7.0     # domain size in x-direction
+ylength    1.5	   # domain size in y-direction
+imax       200     # number of interior cells in x-direction
+jmax       40	   # number of interior cells in y-direction
+
+# Time Data:
+# ---------
+
+te      60.0    # final time
+dt      0.02    # time stepsize
+tau     0.5     # safety factor for time stepsize control (<0 constant delt)
+
+# Pressure Iteration Data:
+# -----------------------
+
+itermax  500       # maximal number of pressure iteration in one time step
+eps      0.0001    # stopping tolerance for pressure iteration
+rho      0.52
+omg      1.7       # relaxation parameter for SOR iteration
+gamma    0.9       # upwind differencing factor gamma
+
+# Multigrid data:
+# ---------
+
+levels        3         # Multigrid levels
+presmooth     55        # Pre-smoothning iterations
+postsmooth    5         # Post-smoothning iterations
+
+# Particle Tracing Data:
+# -----------------------
+
+numberOfParticles   500
+startTime           0     #if you want to see particles trapped in recirculation zone, startTime should be set to 0 
+injectTimePeriod    1.0
+writeTimePeriod     0.5
+
+x1                  0.0
+y1                  0.5
+x2                  0.0
+y2                  1.5
+
+# Obstacle Geometry Data:
+# -----------------------
+# Shape 0 disable, 1 Rectangle/Square, 2 Circle
+
+shape               1 
+xCenter             0.0
+yCenter             0.0
+xRectLength         2.0
+yRectLength         1.0
+circleRadius        1.0
+
+#===============================================================================