Overview

ClusterCockpit uses the InfluxData line-protocol for collecting the node metric data.

<measurement>,<tag set> <field set> <timestamp [s]>

Note: This is a proposal for a different way to send & store the data!

Supported measurements:

flops_sp
flops_dp
flops_any
load
mem_used
ipc
mem_bw
power
clock
...

Mandatory tags per measurement:

hostname
type in [node, socket, cpu, (accelerator)]
type-id for further specifying the type like CPU socket or HW Thread identifier

Optional tags depending on the measurment:

device for measurement file_bw
device for net_bw if splitting into ib_bw and eth_bw is not enough

Fields per measurement:

The field key is always value

Optional measurements:

If a fixed aggregation to a coarser granularity is desired, add addtional measurments to the same measurement with different tags:

mem_bw,hostname=X,type="socket",type-id=0 value=100.0
mem_bw,hostname=X,type="socket",type-id=1 value=200.0

can additionally be send/stored as:

mem_bw,hostname=X,type="node",type-id=0 value=300.0

It is discussable where the type of aggregation should be encoded if required, either by adding a tag like agg={min,max,sum,avg} or using different fields like:

mem_bw,hostname=X,type="node",type-id=0 sum=300.0,min=100.0,max=200.0,avg=150.0

I prefer the separate agg tag because commonly, only a single type of aggregation is done per measurment (mostly sum but some require avg like ipc)

1.5 KiB Raw Blame History